AIMILAR Golf Cart Battery Meter Battery Charge Discharge Status Indicator Gauge for Lead-Acid Battery Club Car 36V (36V)
AIMILAR Golf Cart Battery Meter Battery Charge Discharge Status Indicator Gauge for Lead-Acid Battery Club Car 36V (36V) by AIMILAR at Jom Jobs. MPN: AY2017H. Hurry! Limited time offer. Offer valid only while supplies last. Product Features: 1.The Positive and the C lead need to be connected together, with one lead going to the positive side of the battery and the one
1.The Positive and the C lead need to be connected together, with one lead going to the positive side of the battery and the one marked negative to the negative side.
2.Once battery was fully charged, meter will cycle through for continuous 6 minutes then stay "full" position.
3.Meter will stay full position while it is connected with batteries first time,will indicate the actual battery level after 155 seconds.
4.Suitable for lead-Acid batteries. NOTE:Will not work with Trojan Brand Batteries.
5.Display: 1 red + 2 yellow + 7 green color LEDs for indicator, 10% per LED segment
6.Application: motorcycle, golf carts, car, jet ski, and so on.
1.Q: Meter scans from full to empty then shuts off:
A: This occurs if your "C" terminal is not connected to the battery "+" or a key switch.
Please connect + to +, - to -, and meter C to battery +.
2.Q: Meter cannot move to full charge:
A: This happens when the battery was fully charged but the battery voltage cannot reach to preset fully charged voltage of meter,
just disconnect the meter from power and reconnect, meter will reset to full.
3.Q: My current meter uses only +/- connect. will meter work without "C" connect? Can I just jumper the + terminal the "C" (meter would always be on) ?
A: The meter will not function properly without the "C" terminal connected. The "C" terminal controls the display on the meter.
You can certainly jump the "C" terminal to the Meter "+" terminal for an always on state.
Or just run a wire from "C" to the key switch so the meter will only be on when the cart is switch on.
Features & Highlights
- ✔️NEW UPDATE LED Battery Indicator Tester:No Resetting Required.
- ✔️IMPORTANT: Please connect + to +, - to -, and meter C to battery +.
- ✔️Once battery was fully charged, meter will cycle through for continuous 6 minutes then stay "full" position.
- ✔️Suitable for lead-acid batteries. Application: motorcycle, golf carts, car, jet ski, and so on. NOTE:Will not work with Trojan brand batteries.
- ✔️SATISFACTION GUARANTEED: 30-Day money back and 2-Year warranty.
|Item Weight:||0.04 pounds|
|Package Weight:||0.08 pounds|
|Package Size:||1.89 x 1.57 x 1.57 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by AIMILAR, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By ABT Power
mpn: 4336330141, ean: 6929102401604,
This is a GREAT LCD battery fuel gauge for 10S 37V Lithium Battery Fuel Gauge, 37V Lithium Li-Polymer battery only , you can easily monitoring your battery capacity and enjoy the device. Note: PLEASE KINDLY CHOOSE THE C...
mpn: BMT-08, ean: 0889327025633,
Newly released from OBDSTAR, BMT-08 Battery Analyzer is specialized in battery test and battery matching, adopts the conductivity test technology, it can quickly detect the battery condition and the malfunction in vehicle start-up system and alternat...
mpn: DWS-709730195085, ean: 0709730195085,
Tests For 6 Or 12V Lead-acid BatteriesTest Batteries Up To 160Ah/1000CCA500A Load Type Battery TesterCompletely Portable, Outside Power Not RequiredAdjustable Dial MeterHeavy Gauge Solid Copper Wire LeadsHeavy-duty Insulated ClampsColor-coded Tempera...
New Watch Battery Tester. This is a new battery tester. Will test AAA, AA, D, 9 volt, 12 volt, 6 volt and 3 volt lithium batteries. Can test alkaline, carbon-zinc, silver oxide, lithium, nickel cadmium and mercury batteries. It measures approximately...
mpn: SA1345, ean: 0026666813457,
Schumacher's Wireless Battery Monitor performs a basic system check based on battery health monitor wirelessly from your smartphone or tablet using SchuLink+ app - (iOS 9.0 or later/Android 5.0 or later). When connected to wireless network, view bat...
mpn: JDiag BT-200, ean: 6002769367800,
Notice: For the deep Deficitbattery （such as the vehicle for a long time shelved,thebattery is not timely charged; lights/doors forgotten to turn off leading toserious power failure cannot start the vehicle etc.）The actual test process may also p...
mpn: bt3581, ean: 0663751813581,
Multifunction LCD Lead Acid Battery Capacity Meter Voltmeter with Temperature Display WIDE TESTING RANGE:10-100V, can set to the battery type and voltage as you need. Size information: product size:61.5*33.5*13.5mm installation dimension:58.5*28....
mpn: CP7612, ean: 0021467076124,
This battery load tester accurately tests the condition of battery and charging systems, and is ideal where real-world load testing is important. With full 100-amp load-testing capacity, this reliable and highly accurate unit works on both 6- and 12-...
mpn: 4336330142, ean: 0788537552314,
General Instruction This tester is designed for automotive battery load voltage test,charging voltage test and starter motor test.It is very useful and can be used in vehicle's fault diagnosis and service. Operation Instruction 1.Battery Load Test ...
mpn: FFT16594, ean: 0692561422591,
voltage and current: 12V/6VBattery tester size: 12 * 5.2 * 1.8cm / 4.7 * 2 * 0.7in Battery tester weight: 1100g Package size: 28 * 16 * 6cm Package weight: 1100gMaterial: metal. Suitable for 6 and 12 volt batteries. Eatures: alternator state check, b...