Autool LAUNCH CNC602A AUTO Car Fuel Injectors Ultrasonic Wave Cleaner Injection Tester With Free 110V Transformer
Autool LAUNCH CNC602A AUTO Car Fuel Injectors Ultrasonic Wave Cleaner Injection Tester With Free 110V Transformer by Launch at Jom Jobs. MPN: CNC-602A. Hurry! Limited time offer. Offer valid only while supplies last. Important notice: Because liquid can not ship by airmail, our CNC-602A do not contain Injector test liquid and Injector detergent. You can purchase
Important notice: Because liquid can not ship by airmail, our CNC-602A do not contain Injector test liquid and Injector detergent. You can purchase it from your local market. Please kindly understand. Liquid picture is for display ONLY.
Launch CNC-602A Feature:
* Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.
* Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.
* Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
* Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.
* Auto. test: To test injectors by simulating different working conditions.
* On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
CNC-602A Techenical Parameter:
Power supply: AC220V±10%, 50/60Hz;
Ultrasonic cleaner power: 100W;
Input power: 250W;
Simulated RPM range: 10~9990rpm; step: 10rpm;
Time range: 1~9999s;
Pulse width: 0.5~25ms; step 0.1 ms;
Fuel tank capacity: 4700ml;
CNC-602A Spare Parts
No. PartCode PartName
1 105020217 CNC pulse signal connection cable 1,T=0.5
2 105020218 CNC pulse signal connection cable 2,T=0.8
3 103260037 Ultrasonic cleaner assembly 100W
4 106030038 On-vehicle adaptor package(tool kits)
5 107010428 CNC-602A user manual(En&Ch)
6 103250013 Top-supply connector 1
7 103250015 Swiss thread adaptor for fuel top-supply injector
8 103250016 Coarse thread adaptor for fuel top-supply injector
9 103250018 CNC-601/801 Hexangular stopper
10 104990012 CNC-801 for BUICK injector adaptor
Features & Highlights
- 1.CNC-602A is an advanced electronic mechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.
- 2. CNC602A is 6-cylinder fuel injector cleaning machine (with 6 tubes),and it can clean and test six injectors as same time. a.) If 4-cylinder engine,when use the CNC602A to clean and test 4 injector(there are 2 connector in machine should be stoppered). b.) Eight-cylinder engine, when you use CNC602 do clean the test, you should do clean the test twice per four injector.
- 3. Item fit for two kinds of injectors. Top feed injector accessories were standard configure. Side feed injector accessories for option. Please contact us if you want to side feed accessories.
- 4. Support no dismantle clean car fuel system.5. The machine support for petrol injector only , it can't support for diesel injector .
- Support Model: Audi,Australia Ford,Benz,BMW,Brilliance,Chevrolet,Chevy,Chrysler,Citroen, Dacia,Dadi,Daewoo,Daihatsu,Demo,Fiat,Ford,GM,Holden, Honda,Hyundai,Isuzu,Jaguar,Kia,Lancia,Land Rover,Mahindra,Maruti,Mazda,Mitsubish,Nissan,Opel, Peugeot,Porsche,Renault,Romeo,Rover,Saab,Seat,Skoda, Smart,Subaru,Suzuki,Tata,Toyota,Volvo,VW,Yamaha