Brake Fluid Tester Auto Diagnostic Brakes Oil Testing Tool Calibrated for DOT4 with 5 LED Indicator
Mega Sale! Save 25% on the Brake Fluid Tester Auto Diagnostic Brakes Oil Testing Tool Calibrated for DOT4 with 5 LED Indicator by Kzyee at Jom Jobs. MPN: KS10. Hurry! Limited time offer. Offer valid only while supplies last. Application Method: please install a battery before using this test pen,unplug the pen cap which is at the front end of the test pen,two metal
please install a battery before using this test pen,unplug the pen cap which is at the front end of the test pen,two metal detection probes will come out,press the power button at the top of the test pen,if there is only the green LED lights but does not twinkle,it indicates that the battery need to be replaced.
After you have turnd on the power,insert the test probe into the brake fluid cup completely,the test pen will display the test result immediately through the LED light,and also maintain the test result.Then you can take out the test pen to see the test result.
Green LED （<1%）ON:the brake fluid performance is excellent.
Yellow LED （<2%）ON:the brake fluid performance is fine.
Yellow LED （<3%）ON:the brake fluid performance is OK,but it need to be detected and observed in the near future.
Red LED (<4%) ON:the brake fluid performance is poor,it need to be replaced.
Red LED (>4%) ON:the brake fluid performance is extremely poor,it need to be replaced immediately!
<1> Replace battery if the Green LED not light up any loger after you press power on button.，
<2> Wash the test probe with tap water after every use.
<3>In case of skin contact with brake fluid, thoroughly wash the affected skin or clothing with water.
<4>Do not expose brake fluid to the atmosphere for a long time as the fluid is hightly hygroscopic!
<5>The tester will automatically power off after about 20 seconds of inactivity.
Features & Highlights
- Applies to detection of the DOT4 brake fluid performance,indicating the brake fluid conditon through five Led lights.
- Using the AC pulse testing method,greatly to reduce the polarization phenomenon during the brake fluid testing,the test result is accurate and the measuring speed is fast.
- Insert the tester into reservoir for a second , then the results will be indicated correctly by LEDs
- It determines the quality of brake fluid and measures moisture from 0%-4%
- This test pen uses a 1.5v AAA dry battery to provide power,but battery NOT included.
|Package Weight:||0.13 pounds|
|Package Size:||4.92 x 1.38 x 1.38 inches|