TBvechi 23Pcs FWD Front Wheel Drive Bearing Adapters Puller Press Replacement Installer Removal Tool Kit
TBvechi 23Pcs FWD Front Wheel Drive Bearing Adapters Puller Press Replacement Installer Removal Tool Kit by TBvechi at Jom Jobs. MPN: AC-ZS-852-SA1. Hurry! Limited time offer. Offer valid only while supplies last. Specifications: ★ For domestic and imported front wheel drive car/ trucks ★ Remove and replace front wheel bearing with the steering knuckle
★ For domestic and imported front wheel drive car/ trucks
★ Remove and replace front wheel bearing with the steering knuckle and strut assembly still on the vehicle.
★ Kit includes everything you need and is ready to use.
★ Strong and durable.
★ For professional use.
★ With Carrying Case/ for easy storage and transportation.
Step.1 Determine if the vehicle has a trapped rotor or a floating rotor.
Step.2 Assemble the tool components, and press out the worn bearing.
Step.3 Lightly lubricate the new bearing, and position it for installation with the tool components assembled. Press the bearing into the spindle assembly until it bottoms.
Step.4 Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.)
Step.5 Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention : The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing.
Step.6 Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires.
Bushing: 2.96"/ 2.62"/ 2.18"/ 2.88"/ 2.50"/ 2.78"/ 2.82"/ 2.90"/ 3.48"/ 3.05"/ 3.21"/ 3.28";
Sleeve: 4.013"/ 3.618"/ 3.246"/ 2.997 "
Sleeve Plate: 3.25"/ 3.250"/ 4.00"/ 4.007 "/ 0.754"/
Red carrying case
Features & Highlights
- Replace wheel bearings while keeping the steering knuckle and strut assembled in tact on the vehicle
- For front wheel drive cars and small trucks
- Adapters made of steel, case made of heavy duty plastic, durable
- No more need for front end alignment when service work is done
- Packaged in a custom case for easy storage and transportation